Multiplexer Input Channel Selection

This submenu will have an effect only if a DT2859 video multiplexer board is fitted.

M Select the monochrome input channel.

Typically channel 0.

R Select Red input channel.

Typically channel 1.

G Select Green input channel.

Typically channel 2.

B Select Blue input channel.

Typically channel 3.

0 Select input channel 0.

Typically raw monochrome.

1 Select input channel 1.

Typically the Red component.

2 Select input channel 2.

Typically the Green component.

3 Select input channel 3.

Typically the Blue component.

4 Select input channel 4

5 Select input channel 5

6 Select input channel 6

7 Select input channel 7

<up> Next input channel. Increase the input channel number by one.

<down> Previous input channel. Decrease the input channel number by one.

Parent menu

Main Menu

DigImage User Documentation